Toronto paint protection film, cut to your panel lines
Stone chips, salt spray and construction debris are the reality of driving the 401. PPF is the only protection that physically absorbs the impact before it reaches your paint.
Protection that works for your paint.
Stone chip defence
A urethane layer absorbs highway debris that would otherwise chip the clearcoat.
01Self-healing
Light swirls and wash marks disappear with heat from the sun or warm water.
02UV stable
Top coats resist yellowing, so the film stays invisible for the life of the warranty.
03Factory paint preserved
Removal is done with controlled heat and leaves the original finish intact.
04Easier washing
The slick surface releases bugs and road film with far less contact.
05Resale value
Original paint in original condition is what a buyer or lease return inspects first.
06
PPF coverage packages for Toronto drivers
Most of the damage on a Toronto car lands on the front: stones thrown up by trucks on the highway, sand and salt in winter, and gravel left behind by the plows in spring. Every car is quoted on its own, but most paint protection film jobs fall into one of three coverage levels. Your written quote lists the exact panels for your make and model.
Illustrative coverage on a BMW. Exact panels, roof coverage and pricing are confirmed for your vehicle in the written quote.
- · Front bumper
- · Leading edge of the hood (the first 18 to 24 inches)
- · Mirror caps
The minimum that makes a real difference against stone chips. A good fit for a daily driver or a lease.
Request quote- · Front bumper
- · Full hood
- · Full front fenders
- · Headlights
- · Mirror caps
- · A-pillars and the front edge of the roof
Covers every panel that faces oncoming debris at highway speed, with no visible line across the middle of the hood. This is what most of our Toronto customers choose.
Request quote- · Every painted panel: doors, rear quarters, roof, trunk
- · Front and rear bumpers
- · Door sills and door handle cups
The right choice for black and dark cars, sports cars with wide rear quarters, and anyone planning to keep the car for years or sell it in top shape.
Request quoteIllustrative coverage on a BMW. Exact panels, roof coverage and pricing are confirmed for your vehicle in the written quote.
Add-ons on any package: door edges, door handle cups, door sills, the rear bumper top (where bags and boxes scrape) and the trunk loading edge.
Recent installs from the studio
Paint protection film installs from our Toronto studio, from daily drivers to supercars.
What drivers say
"The team explained the coverage options clearly and the finished front end looked clean, with no visible edges around the panels."
"Communication was straightforward from the quote to pickup. The car was ready when promised and the film finish looked excellent."
"I was particular about the paint and they took the time to walk me through the install. The final result was exactly what I wanted."
"Careful work around the details and a very tidy handover. The protection is barely noticeable unless you know it is there."
Our PPF installation process, step by step
-
Step 01Vehicle inspection and preparation
We inspect the car with you and note any existing chips, scratches or repainted panels. Then it is washed, decontaminated with an iron remover and clay bar, and wiped down to remove wax and oils, so nothing gets trapped under the PPF.
-
Step 02Paint correction and polishing
Where the inspection shows swirl marks or light scratches, we polish them out first. PPF is clear and locks in whatever is underneath, so the paint should look its best before the film goes on.
-
Step 03
Film preparation and installation
The film is cut from a pattern for your exact make and model, with extra material at the edges. Each piece is positioned on the panel, squeegeed down to push out water and air, and the edges are wrapped or tucked by hand.
-
Step 04Final inspection
Every panel is checked under bright light for bubbles, dust and lifted corners before the car is ready. At handover we walk you around the car, go through the care instructions and register your warranty.
Paint protection film FAQ
How long does PPF installation take?
A front-end package is typically one day. Full-vehicle coverage takes three to four days in the bay.
How long does PPF last?
Quality film runs eight to ten years depending on exposure. Our warranty covers ten years against yellowing, cracking and lifting.
Does PPF damage factory paint?
Not on healthy factory paint. We remove it with controlled heat, leaving the original finish untouched.
What areas should I protect?
Start with the impact zone: bumper, hood, fenders and mirrors. Owners keeping the car long term usually add the rocker panels and door edges.
How much does PPF cost?
It depends on the vehicle and coverage. Send us the year, make and model and we'll return a written, itemized quote.
More ways to protect your car.
Get a PPF Toronto quote
Tell us what you drive, the colour, and whether you want front-end or full coverage. Within one business day you get a written quote with the exact panels, the film and the warranty, plus our recommendation for your car. If your new car is not here yet, tell us the delivery date and we will hold the slot.
Prefer to talk? Call the studio and ask for a PPF quote.